Table of Contents
Advertisement
When selecting Multi
1.
Select Multi.
The sensitivity multiple setting screen will be displayed.
2.
Check whether or not the workpiece is
positioned inside the measurement
range.
3.
Press the ENT Key.
A confirmation message will be displayed.
4.
Select Execute when the basic settings
have completed.
Select Settings when continuing the
measurement contents settings.
Go to
3.
Step
SECTION 3
Menus for Conversational Menu
Scn 0
Set
Auto
Fixed
Multi
Sen0's sensitivity method:
Select Fixed or Multi if
measurement unstable with Auto.
ENT:Set ESC:Back
Line beam image
Scn 0
Set
Sensitivity set for each line.
Set the workpiece correctly
and press the ENT Key.
ENT:Set ESC:Back
Settings will be registered.
Allocate measurement items
to OUT0 to OUT7
in the measurement settings.
Settings can be accessed
from the Adjustment Menu.
Execute
Cancel Settings
Operation Manual6
Z500
47
Advertisement
Table of Contents
Troubleshooting
