Omron Z500 Operation Manual page 169

• SENSET
Function 1
Output
The correction value is set according to the sensor that has currently been used for the
CHECK
measurement (Sensor 0 or Sensor 1) and the measurement method (Wide or Zoom).
Example
Function 2
Output
Example
......
Sets a correction value.
SENSET
Input
delimiter
Command executed correctly
Command not executed correctly
SENSET
Input :
delimiter
The workpiece that has currently been measured is held
horizontally, and the correction value is set.
Output : OK
delimiter
......Clears a correction value.
SENSET C
Input
delimiter
Command executed correctly
Command not executed correctly
SENSET C
Input
: delimiter
The correction value is cleared.
: OK
Output
delimiter
SECTION 7
I/O Format
: OK
delimiter
: ER
delimiter
: OK
delimiter
: ER
delimiter
Z500
Operation Manual
167