5-6 Testing Measurement Performance (Test)
Use the following procedure to execute measurements according to the conditions set for the output
number currently displayed. The test is completed internally by the Z500 and the measurement results
are not output via terminal or RS-232C.
Two methods have been provided for the test. Select an appropriate method.
Test Mode
Number of Samples
The Trigger function will become ineffective during the test measurement.
CHECK
Selection
# times*
Test measurement is performed for the sampling number of times set.
Use the TRIG Key to specify the starting and stopping test
Trg key
measurement.
Test measurement can be performed in stopwatch-style.
Selection
1 to 9999
Effective when setting Test mode to # times.
(100*)
Enter the number of times for test measurement.
SECTION 5
Other Functions
Description
Description
Operation Manual
Z500
129