Omron Z500 Operation Manual page 167

• SCENE
Function 1
Output
Example
Function 2
• Specify a scene number between 0 and 15.
Output
Example
If Environment/Scene in System Mode is set to Terminals, scenes cannot be switched
CHECK
using RS-232C commands. (ER is output.)
Refer to page 146, Environment Settings.
......
Obtains the scene number of the scene being displayed.
SCENE
Input
delimiter
Command executed correctly
Command not executed correctly
SCENE
Input :
delimiter
Output : 4
delimiter
In this example, scene 4 is being displayed.
......
Changes the scene to be measured.
SCENE <Scene number>
Input
Command executed correctly
Command not executed correctly
SCENE 2
Input : delimiter
In this example, the scene is switched to scene 2.
Output : OK
delimiter
REFERENCE
: Scene Number
: ER
delimiter
delimiter
: OK
delimiter
: ER
delimiter
SECTION 7
I/O Format
delimiter
Z500
165
Operation Manual