SECTION 4
Menus for Expert Menu
A confirmation message will be displayed.
3.
The measurement screen for point will be displayed.
4.
The screen for inputting the position of point 1 will be displayed.
5.
The screen for inputting the position of point 2 will be displayed.
6.
A confirmation message will be displayed.
7.
The setting will be registered and the screen in (2.) will return.
Z500
82
Operation Manual
Select Execute.
Position the workpiece correctly and
press the ENT Key.
Set the value to 0.00000 and press the
ENT Key.
Set the value to 5.00000 and press the
ENT Key.
Select Execute.
System will be calibrated.
Clear settings now if
required.
Execute
Cancel
Clear
00000.00000
00005.00000
System will be calibrated.
Execute
Cancel