Omron Z500 Operation Manual page 119

5-3-2 Changing the Digital Monitor's Display Contents
In addition to measurement values and judgment values, judgment upper and
lower limits and measurement items can also be displayed.
The default setting is to display the upper and lower limits. To display
measurement items, change the settings.
Refer to page 29 for details on the contents of display on the screen.
1.
Display the Digital Monitor and enter View Mode.
Refer to page 112.
The items will be displayed.
2.
Press the ENT Key.
The selections will be displayed.
3.
Select an item.
The screen in (2.) will return.
4.
Press the ESC Key.
The setting will be registered and the screen in the Digital Monitor will return.
Judgement (default setting)
9.96ms
Scn 0 Run
0 +0002.65432mm HI=+0005.00000
PASS LO=-0000.00000
1 +0004.65432mm HI=+0010.00000
PASS LO=-0005.00000
2 +0000.00000mm HI=+0010.00000
ERROR LO=-0005.00000
3 -----------mm HI=+0010.00000
LO=-0010.00000
S+ / :Display S+ENT:Adjust
Judgment upper and lower limits
REFERENCE
REFERENCE
SECTION 5
Other Functions
Measurement
9.96ms
Scn 0 Run
0 +0002.65432mm Height
PASS
1 +0004.65432mm Step: 2 pts
PASS
2 +0000.00000mm Width
ERROR
3 -----------mm
S+ / :Display S+ENT:Adjust
Measurement items
Scn 0 View
Judgement
Judgement
Measurement
Operation Manual
Z500
117