INVT SV-DA200 Operation Manual page 172

SV-DA200 series AC servo drives
P6.03 Position latch save mode
Position latch save mode can be set via this parameter:
P6.03
Modbus address
P6.04 Forward high JOG speed
This parameter is used to set the speed of fast forward jogging which is triggered by forward
jogging terminal and switching terminal of high-low jogging speed.
P6.04
Modbus address
P6.05 Reverse high JOG speed
This parameter is used to set the speed of fast reverse jogging which is triggered by reverse
jogging terminal and switching terminal of high-low jogging speed.
P6.05
Modbus address
P6.06 Terminal JOG valid
This parameter is used to set terminal JOG function:
P6.06
Modbus address
1
P6.20 Turret function switch
This parameter is used to set turret function switch:
1
P6.20
Modbus address
Setting value
[0] Do not save
1 Save
Data size
Data size
Data size
Setting value
[0] Invalid
1 Valid
Data size
Setting value
[0] Disabled
1 Enabled
Data size
Setting range Default
0~1 0
Function
16bit Data format
2206, 2207 CANopen address
Setting range Default
0~6000 60
16bit Data format
2208, 2209 CANopen address
Setting range Default
-6000~0 -60
16bit Data format
2210, 2211 CANopen address
Setting range Default
0~1 0
Function
16bit Data format
2212, 2213 CANopen address
Setting range Default
0~1 0
Function
16bit Data format
2240, 2241 CANopen address
‐162‐
Faults and solutions
Unit Available mode
- P
DEC
0x2603, 0x00
Unit Available mode
r/min P
DEC
0x2604, 0x00
Unit Available mode
r/min P
DEC
0x2605, 0x00
Unit Available mode
- P
DEC
0x2606, 0x00
Unit Available mode
- P
DEC
0x2614, 0x00