Setting The Desired Unit Of Measure - Leica PINMASTER II PRO Instructions Manual

EN

SETTING THE DESIRED UNIT OF MEASURE

The Leica Pinmaster II Pro can be set to meters or
yards, the more commonly used unit in the USA.
Setting:
1. Hold the auxiliary button
• appears (flasihing)
USEU
2. Press the main button
of measure.
= for display in yards
US
= for display in meters
EU
24
1
depressed (≥3s).
2
to select the desired unit
Note:
The current setting can always be seen from the display
– if metric values have been selected, a dot always
appears at the bottom right next to the target mark.
3. Save your setting by briefly pressing the auxiliary
button.
• The saved setting initially lights up permanently
for confirmation, then the display changes first
of all to menu item
further settings are have been made.
and the goes out if no
ACD