Edm Settings; Edm - Leica Builder Series User Manual

Builder, EDM Settings
12
12.1
Description

Access step-by-
step

EDM Settings

EDM

With the instrument different settings are available for measurements with red dot
(without reflectors) and prism (with reflectors). The LED on the keyboard indicates
the selected type. Depending on the selected type the selection of prism types is
different. Red dot contains the Flat prism as the only one and is not displayed.
Beside the settings of the EDM it is possible to set the reflector height.
Descriptions apply only to Builder 400 and 500.
1. Turn on the instrument by pressing the
2. Press the key.

EDM settings are not accessible during the following:
• THEO Mode: Level or orientation procedure is running.
• PROG Mode: „YES or NO" decision, for example „Station and Orienta-
tion will be changed and set" or Point List Search is running.
• DATA Mode: One of the procedures IMP/EXP, POINTS or JOB is running.
3. Make desired settings.
4. Accept with OK.
key.
160