Quick Coding - Leica FlexLine TS02 User Manual

7.2
Availability
Description
Access
Coding
The codelist editor of FlexOffice can assign a status to the attributes.
• Attributes with status "fixed" are write-protected. They cannot be overwritten or
edited.
• For attributes with status "Mandatory" an input or a confirmation is required.
• Attributes with status "Normal" can be edited freely.

Quick Coding

-
Using the quick code function, a predefined code can be called directly via the keypad
on the instrument. The code is selected by entering a two digit number, the
measurement is then triggered and the measured data and code saved.
A total of 99 quick codes can be assigned.
The quick code number can be assigned when the code is created in the CODING
screen, in the Codelist Manager in FlexOffice, or it is assigned in accordance with the
order in which the codes were entered, for example, 01 -> first code in the code list
... 10 -> tenth code in the code list.
1. Select Prog from the MAIN MENU.
2. Select Surveying from the PROGRAMS menu.
3. Select Start
4. Press Q-CODE
 
FlexLine, 91