Quick Setting Of Horizontal Angle And Vertical Angle Direction Measurement - Leica Builder Series User Manual

7.5
Quick setting of
horizontal angle
direction measure-
ment step-by-step
Quick setting of
vertical angle
direction measure-
ment step-by-step
Builder, Theodolite Mode
Quick Setting of Horizontal Angle and Vertical Angle Direc-
tion Measurement
1. Make sure that THEO Mode is active.
2. Press to set horizontal angle to "clockwise direction measurement" or
press to set horizontal angle to "counter-clockwise direction measurement".
The horizontal angle is set to clockwise direction or counter-clockwise direction
measurement.
1. Make sure that THEO Mode is active.
2. Press to set vertical angle to the zenith, the horizon or in percentage.
The vertical angle is set.
83