Quick Coding - Leica FlexLine plus User Manual

9.2
Availability
Description
Access
Quick coding step-
by-step
Messages
Instrument Tools
FlexLine plus, Coding

Quick Coding

TS02 plus
Using quick coding, a predefined code can be called directly via the keypad on the
instrument. The code is selected by entering a two-digit number, the measurement is
then triggered and the measured data and code saved.
A total of 99 quick codes can be assigned.
The quick code number can be assigned when the code is created in the Coding
screen, in the Codelist Manager in Instrument Tools, or it is assigned in accordance
with the order in which the codes were entered, for example, 01 -> first code in the
code list ... 10 -> tenth code in the code list.
1. Select Programs from the Main Menu.
2. Select Survey from the Programs Menu.
3. Press
Q-Code.
1. Press
Q-Code.
2. Enter a two-digit number on the keypad.

A two-digit code must always be entered on the keypad even if only a
one-digit code was assigned.
For example: 4 -> enter 04.
3. The code is selected, the measurement triggered and the measured data and
code saved. The name of the selected code is displayed after the measurement.
4. Press Q-Code again to end quick coding.
The following are important messages or warnings that may appear.
Messages
Cannot edit attribute!
No codelist available !
Code not found!
Codelists can be easily created and uploaded to the instrument using the supplied
Instrument Tools software.
- TS06 plus
Description
Attribute with fixed status cannot be changed.
No codelist in memory. Manual input for code and
attributes are called automatically.
No code is assigned to the entered number.

TS09 plus

132