Specifications
26.4.2 Common Area (Memory Area No.0)
Setting parameter control area
Offset
Name
Address
Recalculation
H85
starting table
number
Operation speed setting area
Offset
Name
Address
Operation speed
H88
rate
26-16
Default
When the recalculation request signal (Y1170) turns on, the control unit
will recalculate the positioning data of all the axes from this table
K1
number to no. 600.
Setting Range: K1-K600
Default
All operations relating to axes (positioning, JOG, home return) can be
performed at the specified rate.
K100
Setting Range: K1-K100
Unit: %
Description
Description