Panasonic FP-XH M8N16PD User Manual page 375

Code Name
Synchronous group setting
4030H
error
Synchronous operation
4031H
mode setting error
4041H Completion width error
4042H Pulsar setting error
4043H Pulsar disabled error
4044H Speed factor error
JOG positioning
4080H acceleration/deceleration
method error
JOG positioning
4081H
acceleration time error
JOG positioning
4082H
deceleration time error
Description
The same axis has been set
for the synchronous groups
1 and 2.
Either master axis or slave
axis has not been set.
Multiple axes have been set
for the master or slave axis.
The same axis has been set
for the master and slave
axes.
The slave axis has been set
to the interpolation group.
Operation settings for the
synchronous operation
differential check function
are incorrect.
The completion width is out
of the range.
The pulsar input mode is
incorrect.
The pulsar operation
method is incorrect.
The maximum speed for the
pulsar operation is incorrect.
The pulse input application
of the axis which the uplsar
input is enabled is not set to
pulsar.
The setting of the speed
factor is out of the range.
The acceleration/
deceleration method of the
JOG positioning is out of the
range.
The acceleration time of the
JOG positioning is out of the
range.
The deceleration time of the
JOG positioning is out of the
range.
19.3 Table of Error Codes
Object Recovery
Each
○
axis
Each
○
axis
Each
○
axis
Each
○
axis
Each
○
axis
Each
○
axis
Each
○
axis
Each
○
axis
Each
○
axis
Measures
Check the set value.
If an error occurs
repeatedly with the
correct set values,
consult your
Panasonic
representative.
Check the set value.
If the error occurs
repeatedly with the
correct set values,
please contact us.
Check the set value.
If the error occurs
repeatedly with the
correct set values,
please contact us.
Check the pulse input
application.
When using the pulsar,
set the input
application to "Pulsar".
Check the set value.
If an error occurs
repeatedly with the
correct set values,
consult your
Panasonic
representative.
19-19