Steps Before Running
Block rewrite steps
You can change the program in PROG. mode or RUN mode. The following is a description of
the contents being edited online by FPWIN GR7.
PROCEDURE
1. After changing any program, press <Ctrl> button + <F1> button to perform
PB conversion.
The confirmation dialog box is displayed.
2. Click the [Yes] button.
The confirmation dialog box for comment change is displayed.
3. Click the [Yes] button.
At the end of the normal conversion, the information is displayed in the status bar.
KEY POINTS
•
The line comment is connected with the Boolean address of the program
and managed within the PLC. When changing the program online, download
the program to match the position of the line comment.
8-14