Table of Contents
Advertisement
High-speed counter output related system register
Type
Controller input settings
1 (HSC)
Controller input settings
2 (HSC)
(Note 1): The project name and range displayed vary with the model of control units.
(Note 2): The input not used in high-speed counter function selects "XX not act as high-speed counter for setting".
No. and Setting Items
400
High-speed counter
settings
(X0-X3)
401
High-speed counter
settings
(X4-X7)
23.2 Settings of the System Registers
Settings
Select any one of + count input input (X0), - count
input input (X0), 2-phase input (X0, X1), individual
CH0
input (X0, X1) and direction detection input (X0,
X1).
Select any one of + count input (X1) and - count
CH1
input (X1).
Select any one of + count input (X2), - count input
CH2
(X2), 2-phase input (X2, X3), individual input (X2,
X3) and direction detection input (X2, X3).
Select any one of + count input (X3) and - count
CH3
input (X3).
Select any one of + count input (X4), - count input
CH4
(X4), 2-phase input (X4,X5), individual input (X4,
X5) and direction detection input (X4, X5).
Select any one of + count input (X5) and - count
CH5
input (X5).
Select any one of + count input (X6), - count input
CH6
(X6), 2-phase input (X6, X7), individual input (X6,
X7), direction detection input (X6, X7).
When using external reset input, select the reset
X6
input of high-speed counter CH0.
Select any one of + count input (X7) and - count
CH7
input (X7).
When using external reset input, select the reset
X7
input of high-speed counter CH2.
23-7
Advertisement
Table of Contents
