Table of Contents
Advertisement
Specifications
26.8.3 Table of MEWTOCOL-COM Communication Errors
Code
Name
! 26
Unit number setting error
! 40
BCC error
! 41
Format error
! 42
NOT support error
Multiple frames procedure
! 43
error
! 60
Parameter error
! 61
Data error
! 62
Registration over error
! 63
PC mode error
! 64
External memory error
! 65
Protection error
! 66
Address error
Missing program
! 67
error/Missing data error
! 68
Can not rewrite in RUN error
! 71
Exclusive control error
26-94
An instruction can not be used in the global area (station number FF)
is received.
A transmission error occurs in the received data.
An instruction inconsistent with the format is received.
An unsupported instruction is received.
In the multi-frame processing, another instruction is received.
The specified parameter content does not exist or can not be used.
There is an error in the contact, data area, data number assignment,
size assignment, range and format assignment.
Exceeds login times or operate without logging in.
An instruction can not be processed was executed in RUN mode.
Bad hardware. The built-in ROM (F-ROM) / master memory may be
abnormal.
Designated content exceeds the stipulated capacity during ROM
transmission.
A read / write error occurred.
A write operation of the program or system register was performed
under the protection status (password setting) or with the master
memory cassette installed.
There is an error in the code format of the address data. In addition,
there is an error in the range assignment when it is exceeded or
insufficient.
It is not possible to read due to the program area has no program or
abnormal memory contents. Or you want to read an unregistered
data.
Edit instructions cannot be rewritten in RUN (ED, SUB, RET, INT, IRET
SSTP,
STPE). Nothing has written into the control unit.
Execution of the instruction can not be processed simultaneously with
the instructions in process.
Description
Advertisement
Table of Contents
