Table of Contents
Advertisement
Automatic Operation (Synchronous Control)
Cam table adjustments
The Cam Table settings screen is provided with a function to make the fine-tuning of set cam
curve data. In order to mitigate radical changes, this adjustment function makes it possible to
fine-tune cam data that has been set. To make adjustments, select the target section number
and press the [Adjust] button. The adjustment screen is displayed. The Adjustment screen
displays the tables corresponding to the numbers of the designated sections out of all the
sections (0% to 100%) divided by the resolution.
Select the data on the target phases (control points) and change the corresponding
displacement data. The adjustments will be reflected by selecting [OK] and the set adjustment
data will be cleared by selecting [Adjustment clear]. The numbers of the adjusted sections
where the cam curve adjustments have been made are displayed in red, which tells that the
adjustments have been completed.
12-30
Advertisement
Table of Contents
