Download  Print this page

Panasonic AKHCU200 Operating Instructions Manual

Akhcu200 series camera control unit.
Hide thumbs

Advertisement

 How the Operating Instructions are configured
<Basics>:
T he <Basics> describes the procedure for connection with the required equipment and for installation.
Before installing this unit, be sure to take the time to read through <Basics> to ensure that the unit will
be installed correctly.
<Operations and Settings> (this manual):
T his <Operations and Settings> describes how to operate the unit and how to establish its settings.
M1012TY0 -FJ

Operating Instructions

<Operations and Settings>
AK-HCU200P
Model No.
AK-HCU200PS
Model No.
AK-HCU200E
Model No.
AK-HCU200ES
Model No.
Camera Control Unit
ENGLISH
VQT4T42A (E)

Advertisement

   Related Manuals for Panasonic AKHCU200

   Summary of Contents for Panasonic AKHCU200

  • Page 1: Operating Instructions

    Operating Instructions <Operations and Settings> Camera Control Unit AK-HCU200P Model No. AK-HCU200PS Model No. AK-HCU200E Model No. AK-HCU200ES Model No.  How the Operating Instructions are configured <Basics>: T he <Basics> describes the procedure for connection with the required equipment and for installation. Before installing this unit, be sure to take the time to read through <Basics> to ensure that the unit will be installed correctly. <Operations and Settings> (this manual): T his <Operations and Settings> describes how to operate the unit and how to establish its settings. ENGLISH M1012TY0 -FJ VQT4T42A (E)
  • Page 2: Table Of Contents

    Contents Picture monitor (PM) displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Web settings .
  • Page 3: Picture Monitor (pm) Displays

    Picture monitor (PM) displays Switching the display Display the camera statuses, warnings, and other information on the picture monitor using the operation panel of the ROP . Press the CHARA button of the ROP to display the desired information . The camera statuses, warnings, and other information are cleared when the CHARA button of the ROP is held down .
  • Page 4: Description Of Information Displayed

    Picture monitor (PM) displays (Continued) „ IRIS display „ Description of information displayed When the information is not displayed on the picture monitor, display it by pressing the CHARA button of the ROP . „ WARNING The camera number is displayed at the top left of the screen, the IRIS „...
  • Page 5 Picture monitor (PM) displays (Continued) z Status displays (page 1 of 4) z Status displays (page 2 of 4) From the status display screen, press the CHARA button of the ROP to From the status displays (page 1 of 4) screen, press the CHARA button display the first page of the status displays .
  • Page 6 Picture monitor (PM) displays (Continued) z Status displays (page 3 of 4) z Status displays (page 4 of 4) From the status displays (page 2 of 4) screen, press the CHARA button From the status displays (page 3 of 4) screen, press the CHARA button of the ROP to display the third page .
  • Page 7 Picture monitor (PM) displays (Continued) z Operation displays (manual) z Operation displays (AUTO) The operation displays appear at the bottom of the screen for 4 seconds If the AWB function, ABB function, or AUTO SETUP function has when any of the following operations have been performed with the been activated when a menu is not displayed on the picture monitor, operation panel of the ROP .
  • Page 8 Picture monitor (PM) displays (Continued) z Contrast automatic adjustment display *1: [AUTO NG1 detailed information] This appears when contrast automatic adjustment (DRS SWITCH) is set The AUTO NG1 detailed information is displayed flashing on the screen . to ON by ROP operation . Rch OUT RANGE Gch OUT RANGE Bch OUT RANGE...
  • Page 9: Menu Operations

    Menu operations Basic menu operations While viewing the menu screen of the picture monitor, operate the MENU button and SELECT dial on the front panel . MENU button Selecting a menu Press the SELECT dial Move the cursor to the desired item (OPERATION or MAINTENANCE) on the “TOP MENU”...
  • Page 10 Menu operations (Continued) Changing the setting value of a setting item Menu items with multiple setting items on one line and text input menu items A number of items and the set values are displayed on the setting screen at the lowest level . Turn the SELECT dial to move the cursor to the menu item you want to set, and then press the SELECT dial .
  • Page 11: Setting Menu Items

    Setting menu items z SETTING1 Screen TOP MENU This is the selection screen for the SETTING1 menu . Moving the cursor to the “SETTING1” menu title and then pressing the SELECT dial redisplays the OPERATION menu one level up . This is the first screen displayed when you hold down the MENU button .
  • Page 12 Setting menu items (Continued) z SETTING2 Screen Setting Item Remarks This is the selection screen for the SETTING2 menu . value Moving the cursor to the “SETTING2” menu title and then pressing the BAR LPF Select the filter through which to pass SELECT dial redisplays the OPERATION menu one level up .
  • Page 13 Setting menu items (Continued) z HD/SD PHASE Screen This menu is used for the HD signal and SD signal phase adjustments . Moving the cursor to the “HD/SD PHASE” menu title and then pressing the SELECT dial redisplays the OPERATION menu one level up . HD/SD PHASE H D H PHASE S D H PHASE...
  • Page 14 Setting menu items (Continued) z SD signal phase <1080i/59 .94 Hz format> Setting of SD-HD V item: 0H GEN LOCK Black burst signal z 3 .58 BB signal (525/59 .94/I) CCU_VBS/SDI (SD)_OUT z VBS/SDI (SD) signal (525/59 .94/I) CAM_HD_SDI_OUT z HD_SDI signal (1125/59 .94/I) 1122 1123 1124 1125 CCU_HD_SDI_OUT...
  • Page 15 Setting menu items (Continued) Setting of SD-HD V item: 0H_SD_DLAY (1FRAM–90H DLY) GEN LOCK Black burst signal z 3 .58 BB signal (525/59 .94/I) CCU_VBS/SDI (SD)_OUT z VBS/SDI (SD) signal (525/59 .94/I) 1FRAM–90H (HD) LINE CAM_HD_SDI_OUT z HD_SDI signal (1125/59 .94/I) 1122 1123 1124 1125 CCU_HD_SDI_OUT z HD_SDI signal...
  • Page 16 Setting menu items (Continued) Setting of SD-HD V item: ADVANCE (75H) GEN LOCK Black burst signal z 4 .43 BB signal (626/50/I) CCU_VBS/SDI (SD)_OUT z VBS/SDI (SD) signal (626/50/I) CAM_HD_SDI_OUT z HD_SDI signal (1125/50/I) 1122 1123 1124 1125 CCU_HD_SDI_OUT z HD_SDI signal (1125/50/I) 1122 1123 1124 1125 75H (HD) LINE...
  • Page 17 Setting menu items (Continued) z HD signal phase <1080i/59 .94 Hz format> Setting of SD-HD V item: 0H GEN LOCK Tri-level sync signal z Tri-level sync signal (1125/59 .94/I) 1122 1123 1124 1125 CAM_HD_SDI_OUT z HD_SDI signal 1122 1123 1124 1125 CCU_HD_SDI_OUT z HD_SDI signal (1125/59 .94/I)
  • Page 18 Setting menu items (Continued) Setting of SD-HD V item: 0H_SD_DLAY (1FRAM–90H DLY) GEN LOCK Tri-level sync signal z Tri-level sync signal (1125/59 .94/I) 1122 1123 1124 1125 CCU_HD_SDI_OUT z HD_SDI signal 1122 1123 1124 1125 CAM_HD_SDI_OUT z HD_SDI signal (1125/59 .94/I) 1122 1123 1124 1125 CCU_VBS/SDI (SD)_OUT z VBS/SDI (SD) signal...
  • Page 19 Setting menu items (Continued) Setting of SD-HD V item: ADVANCE (75H) GEN LOCK Tri-level sync signal z Tri-level sync signal (1125/50/I) 1122 1123 1124 1125 CCU_HD_SDI_OUT z HD_SDI signal (1125/50/I) 1122 1123 1124 1125 CAM_HD_SDI_OUT z HD_SDI signal (1125/50/I) 1122 1123 1124 1125 CCU_VBS/SDI (SD)_OUT z VBS/SDI (SD) signal (626/50/I)
  • Page 20 Setting menu items (Continued) z BAR ID Screen Setting Item Remarks This menu is used to set the BAR IDs displayed on the color bars . value Moving the cursor to the “BAR ID” menu title and then pressing the ID2 POSITION V (vertical): Set the display start position of BAR ID2...
  • Page 21: Maintenance Menu

    Setting menu items (Continued) z INCOM/MIC Screen MAINTENANCE Menu This menu is used for the unit’s intercom settings . Configure the camera’s intercom setting on the camera . This is the selection screen for the MAINTENANCE menu . Moving the cursor to the “INCOM/MIC” menu title and then pressing the Moving the cursor to the “MAINTENANCE”...
  • Page 22 Setting menu items (Continued) z START UP Screen z ANALOG GAIN Screen This menu is used to set the control that is performed when the unit’s This menu is used to set the analog signal levels . power is turned on . Moving the cursor to the “ANALOG GAIN”...
  • Page 23 Setting menu items (Continued) z NETWORK Screen z VERSION Screen This menu is used for the network settings . This menu is used to display the version information for the application Moving the cursor to the “NETWORK” menu title and then pressing the software and FPGA .
  • Page 24 Setting menu items (Continued) z PM VIEW SETTING Screen z PM OPERATION STATUS Screen This menu is used to set ON or OFF for the items (IRIS, status display) This menu is used to set ON or OFF for the operation items to display to display on the picture monitor .
  • Page 25 Setting menu items (Continued) z SYSTEM Screen Item Remarks This menu is used to initialize the menu settings . DOWNLOAD Save this unit’s setting information (following data) to Moving the cursor to the “SYSTEM” menu title and then pressing the DATA BACK UP the memory card .
  • Page 26: Web Settings

    Web settings z Moving from one menu to another You can connect the unit and a computer, and configure various settings To move from one menu to another, select the desired menu on the left from the Web browser screen . of the screen .
  • Page 27: Description Of Menus

    Web settings (Continued) z Item setting operations (settings) z SETTING1 Screen The current settings are displayed on the setting screen . When you change a setting and then select the “SET” button on the screen, the new value is reflected on the unit . Notes z When a setting has also been changed on the unit, the value that was set last takes priority .
  • Page 28 Web settings (Continued) z SETTING2 Screen Setting Item Remarks value HD BAR LPF Select the filter through which to pass 3TAP the color bar signals to be output 5TAP from the HD/SD SDI OUT connectors 7TAP when BAR has been selected on the 9TAP operation panel of the ROP .
  • Page 29 Web settings (Continued) z HD/SD PHASE Screen This menu is used for the HD signal and SD signal phase adjustments . indicates the factory default setting . Setting Item Remarks value HD H PHASE 59 .94 Hz: Adjust the horizontal sync phase of –1099 HDTV output in respect to the sync │...
  • Page 30 Web settings (Continued) z BAR ID Screen Setting Item Remarks This menu is used to set the BAR IDs displayed on the color bars . value ID2 POSITION V (vertical): Set the display start position of BAR ID2 displayed on the color bars when the color bars are displayed .
  • Page 31: Items When The Maintenance Menu Is Selected

    Web settings (Continued) z INCOM/MIC Screen Items when the MAINTENANCE menu is This menu is used for the unit’s intercom settings . selected Configure the camera’s intercom setting on the camera . Display the START UP screen . Display the ANALOG GAIN screen . Display the ND NAME screen .
  • Page 32 Web settings (Continued) z START UP Screen z ANALOG GAIN Screen This menu is used to set the control that is performed when the unit’s This menu is used to set the analog signal levels . power is turned on . indicates the factory default setting .
  • Page 33 Web settings (Continued) z NETWORK Screen z PM VIEW SETTING Screen This screen displays the network addresses . This menu is used to set ON or OFF for the items (IRIS, status display) z On this screen, the addresses cannot be changed . to display on the picture monitor .
  • Page 34 Web settings (Continued) z PM OPERATION STATUS Screen z SYSTEM Screen This menu is used to set ON or OFF for the operation items to display This menu is used to initialize the menu settings . on the picture monitor . To return the menu settings to the factory default settings, add a ...
  • Page 35: Table Of Adjustment Setting Ranges

    Table of adjustment setting ranges Names in [ ] apply when menu operations are performed from a computer using a Web browser . „ OPERATION menu „ Menu Item Adjustment setting range Initial value SETTING1 CCU MODE 1080/59 .94i, 1080/50i 59 .94 Hz: 1080/59 .94i (pages 11 and 27) 50 Hz:...
  • Page 36 Table of adjustment setting ranges (Continued) Menu Item Adjustment setting range Initial value INCOM/MIC 4W/RTS IN LEVEL –40 .0dB to 20 .0dB (0 .5dB increments) (pages 21 and 31) 4W/RTS OUT LEVEL –40 .0dB to 20 .0dB (0 .5dB increments) RTS CANCEL –40 .0dB to 31 .5dB (0 .5dB increments) Factory setting...
  • Page 37 Table of adjustment setting ranges (Continued) Menu Item Adjustment setting range Initial value PM OPERATION STATUS STATUS DISPLAY TIME 0, 2, 4 (pages 24 and 34) [0 sec, 2 sec, 4 sec] [4 sec] MASTER GAIN ON, OFF [MANUAL OPERATION STATUS MASTER GAIN] SHUTTER ON, OFF...
  • Page 38: Connector Pin Assignment Table

    Connector pin assignment table [COMMUNICATION] JBY-25S-1A3F(LF)(SN) (J .S .T . Mfg . Co ., Ltd .) Pin No . Signal Flow of signals Remarks INCOM 1 OUT (H) CCU → SYSTEM 0 dBm, 600 Ω (4W)/1 V [p-p] (RTS) z Select “4W” or “RTS” and “INCOM1” or “INCOM2” with the “INCOM switches” on the INCOM 1 OUT (C) CCU →...
  • Page 39 Connector pin assignment table (Continued) [MIC OUT 1], [MIC OUT 2] HA16RV-3PG(76) (Hirose Electric Co ., Ltd .) Pin No . Signal Flow of signals Remarks SHIELD 0 dBm, 600 Ω CCU → SYSTEM COLD CCU → SYSTEM [CAMERA] [MSU] AK-HCU200P, AK-HCU200E: This connector is for future function expansion .
  • Page 40: Index

    WARNING ..................3, 4 Web Site: http://panasonic.net ©...

This manual is also suitable for:

Ak-hcu200pAk-hcu200psAk-hcu200esAk-hcu200e

Comments to this Manuals

Symbols: 0
Latest comments:
  • ali faour Oct 05, 2013 05:50:
    I NEED TO KNOW HOW TO CONECT THE INTERCOM FOR CCU AK-HCU200