Comparison Of Parameter Information - Panasonic FP-XH M8N16PD User Manual

10.1.2 Comparison of Parameter information

It is possible to compare information on parameters being edited with information saved in the
Configurator PM7. The following procedure is explained on the condition that the Configurator
PM7 has already started.
PROCEDURE
1. Select "Debug" → "Verify"→"File" or "PLC" from the menu bar.
After selecting the file, the "Select a file to verify" dialog box appears. After
selecting PLC, the parameters being edited and configuration information saved
in the PLC can be compared in Configurator PM7, and then the results are
displayed.
2. Select the file from the "Select a file to verify" dialog box and click the [OK]
button.
Compare the parameters being edited and configuration information saved in the
PLC in Configurator PM7, and then display the results.
10.1 Check on Settings
10-3