Installation And Removal Of Terminal Block - Panasonic FP-XH M8N16PD User Manual

5.4.3 Installation and Removal of Terminal Block

The terminal block is screw-fixed and can be installed and removed.
 Removal of the terminal block
Loosen the 2 mounting screws to remove the terminal block. The screws are fixed on the
terminal block, they cannot be removed.
 Installation of the terminal block
• Tighten the screws when the terminal block is lifted up. After tightening the screws, the
terminal box is fixed.
• Please set tightening torque to 0.25 - 0.35N ⋅ m.
5.4 Wiring of Terminal Block
5-13