4.5 Connecting FP0 Expansion Unit
4.5.1 Connecting FP0 Expansion Unit
• FP0 expansion units (expansion unit, high function unit) shall expand on the right side of FP-
X expansion FP0 adapters.
• When the unit is expanded, use the FP0 right connector for expansion and the expansion
hook on the side of the unit.
Installation steps
PROCEDURE
1. Please use a screwdriver to move the expansion hook.
2. Install after the lug bosses on the expanded unit side are aligned.
Please make the connector tightly fitted to eliminate the gap between the units.
3. Please lift the expansion hook according to step 1 to fix the unit.
4.5 Connecting FP0 Expansion Unit
4-9