Table of Contents
Advertisement
6.4.6 Usage of Scattered Cable Connector
The insulation layer can be crimped to save wiring time.
Steps
1. Remove the contact piece from the carrier and crimp it into the tool.
2. Insert the wire with the insulation layer directly into the contact piece, slightly grip the tool
for crimping.
3. Insert the wire into the terminal box after the crimping.
4. Close the cover after insertion of the wire.
KEY POINTS
•
Contact pull pin can be used for correction in case of wrong wiring.
Wrong wiring or wrong crimping of wire can be corrected with the attached
contact pull pin.
6.4 Pulse Input Connection
6-11
Advertisement
Table of Contents
