Table of Contents
Advertisement
Heat dissipation considerations
• In order to facilitate heat dissipation, set the LED display section on the left side.
• Vertical, horizontal or upside down installation are prohibited because they will result in
insufficient heat dissipation, leading to abnormal internal heat.
• Do not install directly above the heater, transformer, large capacity resistance and other
equipment with large heat radiation.
Installation space
• Leave at least 50mm of space between the wiring ducts of the unit and other devices to
allow heat radiation and unit replacement.
• To avoid being affected by the radiation, the surface of each unit and the power line or
electromagnetic switches should be separated by 100 mm or more when installing. Make
sure it separated with other devices by a certain distance, especially when it is installed on
the back side of the control cabinet.
• Please ensure space for the cable connecting to the programming tool.
4.1 Installation
4-3
Advertisement
Table of Contents
