Table of Contents
Advertisement
Memory /Master Memory Cassette
21.4.4 Transferring Data from Master Memory Cassette to Control Unit
The data saved in the master memory cassette can be transferred to the control unit by the
following methods.
Operating steps
Use FPWIN GR7 and follow these steps to transfer data to the master memory cassette from
the control unit. Explain it as below assuming that the FPWIN GR7 has been started.
PROCEDURE
1. Select "Online" → "Switch to Online Mode" from the menu bar.
2. Select "Tools" → "Internal Memory<=>Master Memory" from the menu bar.
The "Internal Memory <=> Master Memory" dialog box is displayed.
3. Change the transfer direction to "Master memory => Internal Memory", click
the "Execute" button.
The message is displayed at the end of the transmission.
KEY POINTS
After the transfer, and PROG is switched to RUN, the contents in the master
•
memory cassette and the internal memory are checked. The transfer
process is not performed if consistent.
21-12
Advertisement
Table of Contents
