IDK MSD-6203 Command Reference Manual page 101

@GCM / @ECM
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@RCV
Setting Command
Response
Parameter
Getting Command
example Response
Description Loading video channel of crosspoint memory 1.
Remarks
Editing crosspoint memory
@GCM, memory
@GCM, memory, v_1, a_1, v_2, a_2, v_3, a_3, ･･･, v_8, a_8, name
@ECM, memory, v_1, a_1, v_2, a_2, v_3, a_3, ･･･, v_8, a_8
@ECM, memory, v_1, a_1, v_2, a_2, v_3, a_3, ･･･, v_8, a_8
memory: Crosspoint memory
1 to 9
v_1-8: Video channel
a_1-8: Audio channel
-1 = Not controlled [Default], 0 = OFF, 1 = IN1 to 8 = IN8
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
[Default] 20 (space)
@GCM,2
@GCM,2,3,3,1,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,PATTERN2
Getting the video and audio channels of crosspoint memory 2.
OUT1: IN3, OUT2: IN1 are saved with the name of "PATTERN2",
OUT3 to OUT8: Not controlled but saved
@ECM,2,1,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
@ECM,2,1,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
Setting the crosspoint memory 2 to:
OUT1: IN1, OUT2: Not controlled
Nothing is saved in the memory by factory default, the state is "-1" (Not
controlled). If you save only video (@SCV) or audio (@SCA) at the first saving of
crosspoint settings, "-1" (Not controlled) is returned to unsaved audio and video.
Loading crosspoint memory (setting video channel)
@RCV, memory
@RCV, memory
memory: Crosspoint memory
1 to 9
@RCV,1
@RCV,1
－
MSD-62 series Command Guide
101