@GDI / @SDI
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set color depth.
Setting
Command
example
Response
Description Setting the set IN4 color depth to 24-BIT COLOR.
Remarks
Deep Color input
@GDI
@GDI, color_1, color_2, color_3, color_4, ・・・, color_8
@SDI, ch_1, color_1 (, ch_2, color_2・・・)
@SDI, ch_1, color_1 (, ch_2, color_2・・・)
color_1-8: Color depth
0 = 24-BIT COLOR [Default], 1 = 30-BIT COLOR
ch_1-8: Input channel
0 = All digital inputs, 1 = IN1 to 8 = IN8
@GDI
@GDI,1,1,1,0,1,1,1,1
IN4: 24-BIT COLOR,
Other input channels: 30-BIT COLOR
@SDI,4,0
@SDI,4,0
These commands are only for digital input.
IN7 and IN8 are available only when "1" (Digital signal) is selected for "@GIN /
@SIN Signal selection of DVI input connector". If "0" (Analog signal) is
selected, "-1" is returned.
MSD-62 series Command Guide
73