IDK MSD-6203 Command Reference Manual page 57

@GEN / @SEN
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set HDCP output.
Setting Command
example Response
Description Setting OUT1 to "1" (HDCP is always encrypted).
Remarks
@GHR / @SHR
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set number of HDCP retires.
Setting Command
example Response
Description Setting OUT4 to retry for up to 10 times.
Remarks
HDCP output
@GEN
@GEN, hdcp_1, hdcp_2, hdcp_3, ･･･, hdcp_8
@SEN, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
@SEN, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
hdcp_1-8: HDCP output
0 = HDCP is encrypted only if input signal is with HDCP,
1 = HDCP is always encrypted. [Default],
2 = HDCP is not encrypted.
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GEN
@GEN, 1,1,1,1,1,1,1,0
OUT8: HDCP is encrypted only if input signal is with HDCP.
Other output channels: HDCP is always encrypted.
@SEN,1,1
@SEN,1,1
－
The number of HDCP retries
@GHR
@GHR, retry_1, retry_2, retry_3, ･･･, retry_8
@SHR, ch_1, retry_1 (, ch_2, retry_2･･･)
@SHR, ch_1, retry_1 (, ch_2, retry_2･･･)
retry_1-8: The number of retires
-1 = Retry until succeed [Default],
0 = Not retry,
1 to 100 = Retry for the desired number of retries
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GHR
@GHR, -1,-1,-1,-1,-1,-1,-1,10
OUT8: Retry for up to 10 times.
Other output channels: continue to retry until succeed.
@SHR,4,10
@SHR,4,10
－
MSD-62 series Command Guide
57