Table of Contents
Advertisement
MSD-62 series Command Guide
@GRC / @SRC
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting settings of reply command 2:
Setting
Command
example
Response
Description Setting reply command 1 as follows:
Remarks
92
Response command
@GRC, no
@GRC, no, process, length, command, mask, memo
@SRC, no, process, length, command, mask, memo
@SRC, no, process, length, command, mask, memo
no: Response command number
1 to 32
process
0 = Stop, 1 = Continue, 2 = Resending commands
length: Reply command data size (bytes)
0 to 30
command: Reply command data
length × 2 digits with 0 to 9, A to F, a to f = 4 bit per digit (in hexadecimal)
mask: Mask data
length × 2 digits with 0 to 9, A to F, a to f = 4 bit per digit (in hexadecimal)
memo:
Up to 14 characters of 20 to 7D except 2C (,) from ASCII codes.
@GRC,2
@GRC,2,0,1,40,40,NG
・Processing: Stop
・Data size: 1 byte
・Command data: 40 (in hex)
・Mask data: 40 (checking the second bit from the top)
・Memo: NG (no good)
@SRC,1,1,9,52454356204F4B0D0A,FFFFFFFFFFFFFFFFFF,OK
@SRC,1,1,9,52454356204F4B0D0A,FFFFFFFFFFFFFFFFFF,OK
・Processing: Continue
・Data size: 9 bytes
・Command data: RECV OK CR LF (ASCII)
・Mask data: ALL: FF (checking all bits)
・Memo: OK
－
Advertisement
Table of Contents
