IDK MSD-6203 Command Reference Manual page 27

@GNM / @SNM
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@IAS
Setting Command
Response
Parameter
Setting Command
example Response
Description Initializing the following settings in order to display images input from IN1 on the
Remarks
Input masking
@GNM, ch
@GNM, ch, left, right, top, bottom
@SNM, ch, left, right, top, bottom
@SNM, ch, left, right, top, bottom
ch: Input channel
1 = IN1 to 8 = IN8
left: Left side masking
Horizontal input position to right side masking
[Default] 0
right: Right side masking
Left side masking to horizontal input position + horizontal input size
[Default] Horizontal input size
top: Top side masking
Vertical input position to bottom side masking
[Default] 0
bottom: Bottom side masking
Top side masking to vertical input position +vertical input size
[Default] Vertical input size
@GNM,1
@GNM,1,0,1920,0,1080
Getting the set IN1 input masking.
Left: 0, right: 1920, top: 0, bottom: 1080
@SNM,1,0,1920,0,1080
@SNM,1,0,1920,0,1080
Setting IN1 input masking to 0 for left, 1920 for right, 0 for top, 1080 for bottom.
－
Input automatic sizing
@IAS, ch_1 (, ch_2･･･)
@IAS, ch_1 (, ch_2･･･)
ch_1-8: Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
@IAS,1
@IAS,1
full screen:
@GAP / @SAP Aspect
@GOV / @SOV Overscan
position
@GNP / @SNP Input
size
@GNS / @SNS Input
@GNM / @SNM Input
－
ratio
masking
MSD-62 series Command Guide
27