IDK MSD-6203 Command Reference Manual page 41

@GHE / @SHE
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting HDCP input enabled/disabled.
Setting Command
example Response
Description Setting IN1 HDCP input to be disabled.
Remarks
@GAI / @SAI
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting signal type of analog input.
Setting Command
example Response
Description Setting the signal type of IN7 and IN8 to YPbPr.
Remarks
HDCP input enabled/disabled
@GHE
@GHE, hdcp_1, hdcp_2, hdcp_3, hdcp_4, ･･･, hdcp_8
@SHE, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
@SHE, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
hdcp_1-8 : HDCP input enabled/disabled
0 = DISABLE, 1 = ENABLE
[Default] ENABLE
ch_1-8: Input channel
0 = All digital inputs, 1 = IN1 to 8 = IN8
@GHE
@GHE,1,1,0,1,1,1,1,1
IN3: disables HDCP input, other input channels: enables HDCP input
@SHE,1,0
@SHE,1,0
These commands are only for digital input.
IN7 and IN8 are available only if "1" (Digital signal) is selected for "@GIN / @SIN
Signal selection of DVI input connector". If "0" (Analog signal) is selected, "-1"
is returned.
Analog input type
@GAI
@GAI, type_1, type_2
@SAI, ch_1, type_1 (, ch_2, type_2)
@SAI, ch_1, type_1 (, ch_2, type_2)
type_1-2: Signal type
0 = AUTO [Default],
3 = VIDEO AUTO,
ch_1-2: Input channel
0 = All analog inputs, 7 = IN7, 8 = IN8
@GAI
@GAI,0,2
IN7: AUTO, IN8: YPbPr
@SAI,0,2
@SAI,0,2
These commands are only for analog input.
IN7 and IN8 are available only if "0" (Analog signal) is selected for "@GIN / @SIN
Signal selection of DVI input connector". If "1" (Digital signal) is selected, "-1" is
returned.
MSD-62 series Command Guide
1 = RGB, 2 = YPbPr,
4 = VIDEO, 5 = Y/C
41