IDK MSD-6203 Command Reference Manual page 89

@GEC / @SEC
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
Control command (Displaying received data) (cont'd)
@GEC,3
@GEC,3,0,8,POWER STATUS,9,47455420504F570D0A,2000,2,200,0,1,0D
Getting settings of control command 3.
・Delay time: 0 ms
・Output port: LAN2
・Memo: POWER STATUS
・Data size: 9 bytes
・Command data: GET POW CR LF (ASCII codes)
・Timeout: 2000 ms
・Retry: 2 times
・Retry interval: 200 ms
・Retryover: Stop
・Received data: Displayed in ASCII codes
・Delimiter: 0D in hex (CR =ASCII codes)
@SEC,3,0,8,POWER STATUS,9,47455420504F570D0A,2000,2,200,0,1,0D
@SEC,3,0,8,POWER STATUS,9,47455420504F570D0A,2000,2,200,0,1,0D
Setting control command 3 as follows:
・Delay time: 0 ms
・Output port: LAN2
・Memo: POWER STATUS
・Data size: 9 bytes
・Command data: GET POW CR LF (ASCII codes)
・Timeout: 2000 ms
・Retry: 2 times
・Retry interval: 200 ms
・Retryover: Stop
・Received data: Displayed in ASCII codes
・Delimiter: 0D in hex (CR =ASCII codes)
－
MSD-62 series Command Guide
89