IDK MSD-6203 Command Reference Manual page 98

MSD-62 series Command Guide
@GTL / @STL
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the lighting condition of the COMMAND E.
Setting Command
example Response
Description Setting the COMMAND E to light while a command is being executed.
Remarks
98
Lighting condition of execution button
@GTL, switch_1 (, switch_2･･･)
@GTL, switch_1, led_1 (, switch_2, led_2･･･)
@STL, switch_1, led_1 (, switch_2, led_2･･･)
@STL, switch_1, led_1 (, switch_2, led_2･･･)
switch_1-9: Command execution button
0 = All command execution buttons
1 = COMMAND A to 9 = COMMAND I
led_1-9 : Lighting condition
If a control command(s) having only one PLANE, PLANE A or PLANE B is
linked to a control command execution button:
0 = Lights when a control command is registered. [Default]
1 = Lights while a control command is being executed.
If a control command(s) having two PLANEs, PLANE A and PLANE B is
linked to a control command execution button:
0 = A control command(s) that is linked to a button is executed by pressing
the desired button when the control command execution button
lights/blinks.
Lights: Control command registered to PLANE A.
Blinks: Control command registered to PLANE B.
1 = The control command that is linked to a button is executed by pressing
a desired button when the control command execution button
lights/goes out.
Lights: Control command registered to PLANE A
Goes out: Control command registered to PLANE B
@GTL,5
@GTL,5,0
The COMMAND E lights if a control command is registered.
(If one PLANE is linked)
@STL,5,1
@STL,5,1
(If one PLANE is linked)
－