Setting Up Lan Communication - IDK MSD-6203 Command Reference Manual

2.2.3 Setting up LAN communication

(1) Connect the MSD and the control device via a LAN cable.
(2) Set up LAN communication as follows:
・Set IP address and subnet mask
・Operation mode of LAN communication: "RECEIVER"
・TCP pot number: 23, 1100, 6000 to 6999
(3) Establish the connection from the control device to the IP address and TCP port that are set to the
MSD in step (2) above.
(4) Send a communication command from the control device to the MSD in order to check the control
status of the MSD.
Step (3)
Step (1)
LAN cable
Laptop
Step (2)
(Controller)
[Fig. 2.5] Setting LAN communication (Example: MSD-6208 with Dante)
Step (4)
Communication
command
MSD-62 series Command Guide
【Reference: User's Guide】
9