@GAD / @SAD
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set channel switching mode to:
Setting
Command
example
Response
Description Setting the channel switching mode to:
Remarks
@GOA / @SOA
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting long reach mode setting of OUT1B.
Setting
Command
example
Response
Description Setting long reach mode of OUT1B to ON.
Remarks
Channel switching mode for input channel automatic switching
@GAD
@GAD, mode_1, mode_2, mode_3, ・・・, mode_8
@SAD, ch_1, mode_1 (, ch_2, mode_2・・・)
@SAD, ch_1, mode_1 (, ch_2, mode_2・・・)
mode_1-8 : Channel switching mode
0 = VIDEO, 1 = AUDIO, 2 = V&A [Default]
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GAD
@GAD,2,2, 2,2,1,1,1,1
OUT1 to OUT4: V&A, OUT5 to OUT8: AUDIO
@SAD,1,2,2,2,3,0,4,0
@SAD,1,2,2,2,3,0,4,0
OUT1 and OUT2: V&A, OUT3 and OUT4: VIDEO
-
HDBaseT output long reach mode
@GOA, ch
@GOA, ch, mode
@SOA, ch_1, mode_1 (, ch_2, mode_2・・・)
@SOA, ch_1, mode_1 (, ch_2, mode_2・・・)
mode_1-8: Setting mode
0 = long reach mode OFF [Default], 1 = long reach mode ON
ch_1-8: Output channel
0 = All outputs, 1 = OUT1B to 8 = OUT8B
@GOA,1
@GOA,1,0
OUT1B: Long reach mode is set to OFF
@SOA,1,1
@SOA,1,1
If this menu is set to "ON", resolutions up to 1080p (24 bit) are supported. If it
exceeds 1080p (24 bit), signals cannot be received.
MSD-62 series Command Guide
61