IDK MSD-6203 Command Reference Manual page 84

MSD-62 series Command Guide
@GLP / @SLP
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set TCP port number.
Setting Command
example Response
Description Setting port number of connection 8 to "6000".
Remarks
@GMC
Getting Command
Response
Parameter
Getting Command
example Response
Description
Remarks
84
TCP port number
@GLP
@GLP, port_1, port_2, port_3, port_4, port_5, port_6, port_7, port_8
@SLP, connection_1, port_1 (, connection_2, port_2･･･)
@SLP, connection_1, port_1 (, connection_2, port_2･･･)
connection_1-8: Connection number
0 = All connections, 1 = Connection 1 to 8 = Connection 8
port_1-8: TCP port number
23, 80, 1100, 5000 to 5999, 6000 to 6999
[Default]
Connection 1 to 3 = 1100, Connection 4 to 6 = 23,
Connection 7 to 8 = 80
@GLP
@GLP,1100,1100,1100,23,23,23,80,80
Connection 1 to 3: 1100, Connection 4 to 6: 23, Connection 7 and 8: 80
@SLP,8,6000
@SLP,8,6000
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD settings.
MAC address
@GMC
@GMC, unit_1, unit_2, unit_3, unit_4, unit_5, unit_6
unit_1: Upper bit of the MAC address to to unit_6: lower bit of the MAC address
00 to FF = 8 bit (in hexadecimal)
@GMC
@GMC,00,08,E5,5F,00,00
Getting the set MAC address.
MAC address: 00-08-E5-5F-00-00
－