Table of Contents
Advertisement
MSD-62 series Command Guide
@GTP / @STP
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set test pattern.
Setting
Command
example
Response
Description Setting OUT1 to VERTICAL COLOR BAR without scrolling.
Remarks
32
Test pattern
@GTP
@GTP, pattern_1, scroll_1, pattern_2, scroll_2, pattern_3, scroll_3, ･･･,
pattern_8, scroll_8
@STP, ch_1, pattern_1, scroll_1 (, ch_2, pattern_2, scroll_2･･･)
@STP, ch_1, pattern_1, scroll_1 (, ch_2, pattern_2, scroll_2･･･)
pattern_1-8: Test pattern
0 = OFF [Default],
2 = HORIZONTAL COLOR BAR,
4 = HORIZONTAL GRAY SCALE,
6 = HORIZONTAL RAMP,
8 = 50% WHITE RASTER,
10 = 100% GREEN RASTER,
12 = CROSS HATCH,
14 = VERTICAL STRIPE,
16 = VERTICAL ZEBRA,
Test pattern numbers 1 to 6, 16 and 17 can be scrolled.
scroll_1-8: Scrolling
0 = OFF [Default],
1 = 3 pixels/1 frame to 10 = 30 pixels/1 frame
The number of pixels to be scrolled per frame = the set value×3
ch_1-8 : Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GTP
@GTP,3,1,3,1,3,1,3,1,0,0,0,0,0,0,0,0
OUT1 to OUT4: VERTICAL GRAY SCALE at 3 pixels/frame scrolling
OUT5 to OUT8: test pattern is not output.
@STP,1,1,0
@STP,1,1,0
An error occurs if this menu is set while video combination mode is enabled.
1 = VERTICAL COLOR BAR,
3 = VERTICAL GRAY SCALE,
5 = VERTICAL RAMP,
7 = 100% WHITE RASTER,
9 = 100% RED RASTER,
11 = 100% BLUE RASTER,
13 = OUTPUT FRAME,
15 = HORIZONTAL STRIPE,
17 = HORIZONTAL ZEBRA
Advertisement
Table of Contents
