IDK MSD-6203 Command Reference Manual page 102

MSD-62 series Command Guide
@SCV / @SEV
Setting Description Overwriting all
Command
Response
Setting Description Overwriting partly
Command
Response
Parameter
Setting Command
example Response
Description Saving the current video channel in crosspoint memory 2 without changing
Setting Command
example Response
Description Saving the current video channel in crosspoint memory 2 with the name of
Remarks
@GCV / @ECV
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
102
Saving crosspoint memory (Setting video channel)
@SCV, memory (, name)
@SCV, memory (, name)
@SEV, memory (, name)
@SEV, memory (, name)
memory: Crosspoint memory
1 to 9
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
If you do not specify memory name, only settings of crosspoint are saved without
changing the memory name.
@SCV,2
@SCV,2
memory name.
@SEV,2,PATTERN2
@SEV,2,PATTERN2
"PATTERN2". Output settings that are set to Not Controlled are not saved.
－
Editing crosspoint memory (Setting video channel)
@GCV, memory
@GCV, memory, v_1, v_2, v_3, ･･･, v_8, name
@ECV, memory, v_1, v_2, v_3, ･･･, v_8
@ECV, memory, v_1, v_2, v_3, ･･･, v_8
memory: Crosspoint memory
1 to 9
v_1-8: Video channel
-1 = Not controlled [Default], 0 = OFF, 1 = IN1 to 8 = IN8
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
[Default] 20 (space)
@GCV,2
@GCV,2,3,1,1,1,1,1,1,1,PATTERN2
Getting video channel of crosspoint memory 2.
OUT1: IN3, Other outputs: IN1 are saved with the name of "PATTERN2".
@ECV,2,1,1,1,1,-1,-1,-1,-1
@ECV,2,1,1,1,1,-1,-1,-1,-1
When crosspoint memory 2 is loaded, OUT1 to OUT4 are set to IN1,
OUT5 to OUT8 are set to Not Controlled.
Nothing is saved in the memory by factory default, the state is "-1" (Not
controlled). If you save only audio (@SCA) at the first saving of crosspoint
settings, "-1" (Not controlled) is returned to unsaved audio and video.