IDK MSD-6203 Command Reference Manual page 119

@GES
Getting Command
Response
Parameter
Getting Command
example Response
Description
Remarks
@GIV
Getting Command
Response
Parameter
Getting Command
example Response
Description Getting the product information.
Remarks
Monitor's EDID
@GES, channel, mode
@GES, channel, mode, status_1 (, status_2, status_3･･･)
channel: Output connector
1 = OUT1 to 8 = OUT8
mode: Statuses to be gotten
0 = All of 1 to 4,
1 = Monitor's name,
2 = Resolution and dot clock,
3 = HDMI support status, sampling structure, and color depth
4 = Audio support status and sampling frequency, bit length, the number of
channels, and support status of compressed audio *
status_1-4: Status
*1
For sink device that does not support HDMI, "DVI" is returned.
For sink device that supports HDMI, "HDMI" is returned, and then supported
sampling structures (RGB, YCbCr 4: 2: 2, YCbCr 4: 4: 4, and YCbCr 4: 2: 0,
separated with "/") and supported color depths (24, 30, and 36, separated
with "/") are replied in that order.
*2
For sink device that does not support audio, "AUDIO NOT SUPPORT" is
returned. For sink device that supports audio, "LINEAR PCM" is returned,
and then supported sampling frequencies (32, 44.1, 48, 88.2, 96, 176.4, and
192, separated with "/"), bit length (16, 20, and 24, separated with "/"), the
number of channels (one of 1 to 8), and "COMPRESSED AUDIO
SUPPORT" (if compressed audio is supported) are replied in that order.
@GES,1,0
@GES,1,0,MSD-6208,1920x1080 148.50MHz,DVI,AUDIO NOT SUPPORT
Getting the EDID of the sink device connected to OUT1.
・Monitor name: MSD-62008
・Resolution: 1920x1080
・Dot clock: 148.50 MHz
・HDMI: Not supported
・Audio: Not supported
－
Version
@GIV
@GIV, id, ver
id : Model number
ver : Firmware version
@GIV
@GIV,MSD-6208,1.00
Model number and firmware version are replied.
－
MSD-62 series Command Guide
*1
,
2
119