IDK MSD-6203 Command Reference Manual page 109

@GZP / @SZP
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the display position of OUT1.
Setting Command
example Response
Description Setting bitmap 1 that is output from OUT1 to be displayed at TOP-LEFT.
Remarks
Display position
@GZP, ch
@GZP, ch, position_1, position_2, position_3, ･･･, position_4
@SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2･･･)
@SZP, ch_1, bitmap_1, position_1 (, ch_2, bitmap_2, position_2･･･)
ch: Output channel
1 = OUT1 to 8 = OUT8
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
position_1-8: Display position
0 = CENTER [Default],
3 = TOP-RIGHT,
Getting commands: registered bitmap settings is returned in order.
bitmap_1-8: Bitmap number
0 = All bitmaps,
3 = Bitmap 3,
Only registered numbers can be specified.
@GZP,1
@GZP,1,1,1,1,1
Displaying at TOP-LEFT.
@SZP,1,1,1
@SZP,1,1,1
－
MSD-62 series Command Guide
1 = TOP-LEFT,
4 = BOTTOM-RIGHT
1 = Bitmap 1,
4 = Bitmap 4
2 = BOTTOM-LEFT,
2 = Bitmap 2,
109