@GIA / @SIA
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting long reach mode setting of IN5.
Setting
Command
example
Response
Description Setting long reach mode of IN6 to ON.
Remarks
HDBaseT input long reach mode
@GIA, ch
@GIA, ch, mode
@SIA, ch, mode
@SIA, ch, mode
ch: Input channel
5 = IN5, 6 = IN6 Make sure to set this menu to "5" or "6".
mode: Setting mode
0 = long reach mode OFF [Default], 1 = long reach mode ON
@GIA,5
@GIA,5,0
Setting long reach mode of IN5 to OFF.
@SIA,6,1
@SIA,6,1
If this menu is set to "ON", resolutions up to 1080p (24 bit) are supported. If it
exceeds 1080p (24 bit), video signal cannot be received.
MSD-62 series Command Guide
43