MSD-62 series Command Guide
@GID / @SID
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the setting of automatic detection of input video interruption.
Setting
Command
example
Response
Description Setting IN2 automatic detection to OFF ("0").
Remarks
@GIN / @SIN
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting the set DVI input signal.
Setting
Command
example
Response
Description Setting IN8 to digital input signal.
Remarks
42
Automatic detection of input video interruption
@GID
@GID, detect_1, detect_2, detect_3, detect_4, ・・・, detect_8
@SID, ch_1, detect_1 (, ch_2, detect_2・・・)
@SID, ch_1, detect_1 (, ch_2, detect_2・・・)
detect_1-8: Automatic detection
0 = OFF, 1 = ON [Default]
ch_1-8: Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
@GID
@GID,1,1,1,1,1,0,1,1
IN6: If input video signal is interrupted, the video output is not turned off instantly.
Other inputs: OFF
@SID,2,0
@SID,2,0
If input video signal is interrupted, not to turn off the video output instantly.
-
Signal selection of DVI input connector
@GIN
@GIN, signal_1, signal_2
@SIN, ch_1, signal_1 (, ch_2, signal_2)
@SIN, ch_1, signal_1 (, ch_2, signal_2)
signal_1-2: Signal selection of DVI input connectors (IN7, IN8)
0 = Analog signal, 1 = Digital signal [Default]
ch_1-2: Input channel
0 =All analog inputs, 7 = IN7, 8 = IN8
@GIN
@GIN,0,0
IN7 and IN8: Analog input signal
@SIN,8,1
@SIN,8,1
-