IDK MSD-6203 Command Reference Manual page 75

@GSP / @SSP The number of speakers
Getting Command @GSP, ch
Response @GSP, ch, number, speaker_1 (, speaker_2･･･)
Setting Command @SSP, ch, number (, speaker_1, speaker_2･･･)
Response @SSP, ch, number (, speaker_1, speaker_2･･･)
Parameter ch: Input channel
number: The number of speakers
speaker_1-8: Speaker configuration
Getting commands: the number of speakers and which speakers will be used is
returned.
Setting commands: if you do not specify the speaker configuration, the following
configuration will be applied depending on the set number of speakers.
For speaker configurations: the number and total number of speakers (speaker_1-8)
do not match, the number is set automatically based on the setting of speaker_1-8.
In case the number exceeds the settable range, an error is returned.
0 = All digital inputs (for setting only), 1 = IN1 to 8 = IN8
1 to 8 [Default] 2
0 = Front Left / Right [Default], 1 = Low Frequency Effect,
2 = Front Center,
4 = Rear Center,
6 = Rear Left / Right Center,
8 = Front Left / Right High,
10 = Front Center High
number
0 1
1 OFF OFF
2 ON OFF
3
ON ON
4
ON ON
5
ON ON
6
ON ON
7 ON ON
8
ON ON
3 = Rear Left / Right,
5 = Front Left / Right Center,
7 = Front Left / Right Wide,
9 = Top Center,
speaker
2 3 4 5
ON OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
ON OFF OFF OFF
OFF ON OFF OFF
ON ON OFF OFF
ON ON ON OFF
ON ON OFF OFF
MSD-62 series Command Guide
6 7 8 9
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
ON OFF OFF OFF
10
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
75