Table of Contents
Advertisement
MSD-62 series Command Guide
@GBT / @SBT
Getting
Command
Response
Setting
Command
Response
Parameter
Getting
Command
example
Response
Description Getting aspect ratio of OUT1.
Setting
Command
example
Response
Description Setting the aspect ratio of bitmap 1 that is output to OUT1 to FLL.
Remarks
108
Aspect ratio
@GBT, ch
@GBT, ch, aspect_1, aspect_2, aspect_3, ･･･, aspect_4
@SBT, ch_1, bitmap_1, aspect_1 (, ch_2, bitmap_2, aspect_2･･･)
@SBT, ch_1, bitmap_1, aspect_1 (, ch_2, bitmap_2, aspect_2･･･)
ch: Output channel
1 = OUT1 to 8 = OUT8
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
aspect_1-8: Aspect ratio
0 = AUTO [Default], 1 = FULL, 2 = THROUGH
Getting commands: registered bitmap settings is returned in order.
bitmap_1-8: Bitmap number
0 = All bitmaps,
3 = bitmap 3,
Only registered numbers can be specified.
@GBT,1
@GBT,1,1,1,1,1
Displayed on FULL screen.
@SBT,1,1,1
@SBT,1,1,1
－
1 = bitmap 1,
4 = bitmap 4
2 = bitmap 2,
Advertisement
Table of Contents
