IDK MSD-6203 Command Reference Manual page 37

@GST / @SST
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set saturations.
Setting Command
example Response
Description Setting IN5 saturation to 105%.
Remarks
@GSU / @SSU
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the input black level.
Setting Command
example Response
Description Setting the IN5 black level to +7.5%.
Remarks
Saturation
@GST
@GST, saturation_1, saturation_2, saturation_3, saturation_4, ･･･, saturation_8
@SST, ch_1, saturation_1 (, ch_2, saturation_2･･･)
@SST, ch_1, saturation_1 (, ch_2, saturation_2･･･)
saturation_1-8: Input saturation
0 to 200 [Default] 100
ch_1-8: Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
@GST
@GST,100,100,100,100,105,100,100,100
IN5: 105 %, other inputs: 100 %
@SST,5,105
@SST,5,105
Hue can be set up to 200%. However, if the dot clock of the input signal exceeds
170 MHz, 100% is applied regardless of this setting.
Black level
@GSU
@GSU, setup_1, setup_2, setup_3, setup_4, ･･･, setup_8
@SSU, ch_1, setup_1 (, ch_2, setup_2･･･)
@SSU, ch_1, setup_1 (, ch_2, setup_2･･･)
setup_1-8: Input black level
-20 = -20 × 0.5 (-10.0 %) to +20 = +20 × 0.5 (+10.0 %)
[Default] ±0 = ±0.0 %
ch_1-8: Input channel
0 = All inputs, 1 = IN1 to 8 = IN8
@GSU
@GSU,0,0,0,0,15,0,0,0
IN5: +7.5%, other inputs: 0%.
@SSU,5,15
@SSU,5,15
－
MSD-62 series Command Guide
37