IDK MSD-6203 Command Reference Manual page 67

@GSF / @SSF
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting sampling frequency settings.
Setting Command
example Response
Description Setting OUT1 sampling frequency to 48 kHz.
Remarks
@GFD
Getting Command
Response
Parameter
Getting Command
example Response
Description Getting the actual sampling frequency.
Remarks
Sampling frequency
@GSF
@GSF, frequency_1, frequency_2, frequency_3, ･･･, frequency_8
@SSF, ch_1, frequency_1 (, ch_2, frequency_2･･･)
@SSF, ch_1, frequency_1 (, ch_2, frequency_2･･･)
frequency_1-8: Sampling frequency
0 = AUTO [Default],
3 = 48 kHz,
6 =192 kHz
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@GSF
@GSF,0,0,0,0,2,2,2,2
OUT1 to OUT4: AUTO, OUT5 to OUT8: 32 kHz
@SSF,1,3
@SSF,1,3
－
Actual sampling frequency
@GFD
@GFD, frequency_1, frequency_2, frequency_3, ･･･, frequency_8
frequency_1-8: Sampling frequency
1 = 32 kHz, 2 = 44.1 kHz,
4 = 88.2 kHz, 5 = 96 kHz,
@GFD
@GFD,5,5,5,5,3,3,3,3
OUT1 to OUT4: 96 kHz, OUT5 to OUT8: 48 kHz
"@GSF / @SSF Sampling frequency" is set to "AUTO", the sampling frequency
that is output actually is returned. If it is set to value other than "AUTO", the set
sampling frequency is returned.
MSD-62 series Command Guide
1 = 32 kHz, 2 = 44.1 kHz,
4 = 88.2 kHz, 5 = 96 kHz,
3 = 48 kHz,
6 = 192 kHz
67