IDK MSD-6203 Command Reference Manual page 59

@HAU
Setting Command
Response
Parameter
Setting Command
example Response
Description
Remarks
@GAU / @SAU
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
HDCP re-encryption
@HAU, ch_1 (, ch_2･･･)
@HAU, ch_1 (, ch_2･･･)
ch_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
@HAU,1
@HAU,1
Setting OUT1 to re-encrypt HDCP.
－
Priority of input channel automatic switching (OFF to ON)
@GAU, out
@GAU, out, in1_priority, in2_priority, in3_priority, in4_priority, ･･･, in8_priority
@SAU, out_1, in1_priority, in2_priority･･･, in8_priority (, out_2, in1_priority･･･)
@SAU, out_1, in1_priority, in2_priority･･･, in8_priority (, out_2, in1_priority･･･)
out, out_1-8: Output channel
0 = All outputs, 1 = OUT1 to 8 = OUT8
in1_priority-in8_priority: Priority
0 = OFF, 1 = priority (high) to 8 = priority (low)
@GAU,1
@GAU,1,1,2,3,4,5,6,7,8
Getting the set priority of OUT1's automatic switching.
IN1>IN2>･･･>IN8.
@SAU,1,8,7,6,5,4,3,2,1
@SAU,1,8,7,6,5,4,3,2,1
Setting the priority of OUT1's automatic switching to IN8>IN7>･･･>IN1.
－
MSD-62 series Command Guide
59