Replacing The Dimm Air Baffle - IBM System x3750 M4 Installation And Service Manual

Replacing the DIMM air baffle

This information provides instructions on how to replace the DIMM air baffle
About this task
To install the DIMM air baffle, complete the following steps:
Procedure
1. Read the safety information that begins on page "Safety" on page vii and
"Installation guidelines" on page 35.
2. Align the tabs on the sides of the DIMM air baffle with the slots on the sides of
the chassis wall and lower the DIMM air baffle into the server.
3. Reinstall the cover (see "Replacing the server top cover" on page 227).
4. Slide the server into the rack.
5. Reconnect the power cord and any cables that you removed.
6. Turn on the peripheral devices and the server.
Attention: For proper cooling and airflow, replace the air baffle before turning
on the server. Operating the server with an air baffle removed might damage
server components.
DIMM air baffle
Chapter 6. Removing and replacing components
233