IBM System x3750 M4 Installation And Service Manual page 635

806f0109-1381ffff • 806f010d-0400ffff
806f0109-1381ffff [PowerSupplyElementName] has been Power Cycled.
Explanation: System has been power cycled.
May also be shown as 806f01091381ffff or 0x806f01091381ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0108
SNMP Trap ID:
Automatically notify Support: No
User response: Host Power :Information only; no action is required.
806f010c-2581ffff Uncorrectable error detected for [PhysicalMemoryElementName] on Subsystem
[MemoryElementName].
Explanation: IMM has detected a Memory uncorrectable error in one of the DIMMs.
May also be shown as 806f010c2581ffff or 0x806f010c2581ffff
Severity: Error
Alert Category: Critical - Memory
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0138
SNMP Trap ID: 41
Automatically notify Support: Yes
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
806f010d-0400ffff The [NumericSensorElementName] has been disabled due to a detected fault.
Explanation: The drive 0 has been disabled (defunct) due to a fault detected by the controller.
May also be shown as 806f010d0400ffff or 0x806f010d0400ffff
Severity: Error
Alert Category: Critical - Hard Disk drive
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0164
SNMP Trap ID: 5
Automatically notify Support: Yes
User response:
1. Check IBM Support site for Service Bulletins/RETAIN tips related to your particular drive.
2. Check IBM Support site for firmware updates related to your particular drive.
3. Check for any other RAID related errors.
4. Replace the drive.
617
Appendix D. Integrated management module II (IMM2) error messages