IBM System x3750 M4 Installation And Service Manual page 556

4000006f-00000000 • 40000071-00000000
4000006f-00000000 Alert Recipient Number [arg1] updated: Name=[arg2], DeliveryMethod=[arg3],
Address=[arg4], IncludeLog=[arg5], Enabled=[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8].
Explanation: The specified user has changed or reset the remote alert recipient configuration.
May also be shown as 4000006f00000000 or 0x4000006f00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0111
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000070-00000000 SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2], AllowedFilters=[arg3] .
Explanation: The specified user has enabled Simple Network Management Protocol (SNMP) traps.
May also be shown as 4000007000000000 or 0x4000007000000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0112
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000071-00000000 The power cap value changed from [arg1] watts to [arg2] watts by user [arg3].
Explanation: The power capping level has been changed.
May also be shown as 4000007100000000 or 0x4000007100000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0113
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required
538
System x3750 M4 Types 8722 and 8733: Installation and Service Guide